English 
 |
The anchor is equivalent to the brake of the boat, and when the boat stops, it must be anchored if it wants not to be blown away by the wind and not to be carried away by the current. The working principle of the anchor is to create a huge holding force by trapping sediment in the bottom, and then part of the anchor chain drags the bottom, and the gravity of the anchor chain itself, the three forces work together to keep the ship in a fixed state.
Stockless anchor: the anchor claw and bolt can be rotated relative to a certain Angle, no cross bar. When the use of two anchor claws at the same time into the soil, the anchor and collection is convenient, the most widely used.
The general characteristics of a stockless anchor are:
(1) Because there is no cross bar, it is very convenient to throw the anchor, and it can be directly collected at the side chain hole after lifting the anchor, which does not occupy the deck area.
(2) Two anchor claws grasp the bottom at the same time, and no anchor claw is exposed to the soil.
(3) The gripping weight ratio of ordinary rod-less anchors (such as Hall anchors, Speck anchors, etc.) is generally about 3 in the soft mud bottom, and the sandy bottom can reach 5 to 7, the maximum is not more than 8, and the gripping force is smaller than that of the rod anchor, but it can be made up by appropriately increasing the anchor weight.
Because of its ease of use, stockless anchors are widely used as bow anchors for merchant ships. The new type of stockless large gripping power anchor has been greatly improved in structure and performance, and its gripping power has been greatly improved.
Hot tags:stockles anchor, JIS anchor, stockless anchors, anchor hall, navy stockless anchor, stockless bower anchor, JIS stockless anchor, standard stockless anchor, types of stockless anchor, standard navy stockless anchor, china, wholesale, cheap, manufacturers, suppliers, factory, in stock
The anchor is equivalent to the brake of the boat, and when the boat stops, it must be anchored if it wants not to be blown away by the wind and not to be carried away by the current. The working principle of the anchor is to create a huge holding force by trapping sediment in the bottom, and then part of the anchor chain drags the bottom, and the gravity of the anchor chain itself, the three forces work together to keep the ship in a fixed state.
Stockless anchor: the anchor claw and bolt can be rotated relative to a certain Angle, no cross bar. When the use of two anchor claws at the same time into the soil, the anchor and collection is convenient, the most widely used.
The general characteristics of a stockless anchor are:
(1) Because there is no cross bar, it is very convenient to throw the anchor, and it can be directly collected at the side chain hole after lifting the anchor, which does not occupy the deck area.
(2) Two anchor claws grasp the bottom at the same time, and no anchor claw is exposed to the soil.
(3) The gripping weight ratio of ordinary rod-less anchors (such as Hall anchors, Speck anchors, etc.) is generally about 3 in the soft mud bottom, and the sandy bottom can reach 5 to 7, the maximum is not more than 8, and the gripping force is smaller than that of the rod anchor, but it can be made up by appropriately increasing the anchor weight.
Because of its ease of use, stockless anchors are widely used as bow anchors for merchant ships. The new type of stockless large gripping power anchor has been greatly improved in structure and performance, and its gripping power has been greatly improved.
Hot tags:stockles anchor, JIS anchor, stockless anchors, anchor hall, navy stockless anchor, stockless bower anchor, JIS stockless anchor, standard stockless anchor, types of stockless anchor, standard navy stockless anchor, china, wholesale, cheap, manufacturers, suppliers, factory, in stock
